BA DT10 en - Edition 1.5 * dt10b110.fm 1-5
Introduction
1.3 Brief description
The DT10 dumper is a self-propelled work machine.
Get informed on and follow the legal regulations of your country.
The main components of the vehicle are:
• Tracked travel gear
• Control stand with integrated oil and fuel tanks
• Internal combustion engine
• Model DT10: two-cylinder diesel engine
• Model DT10: two-cylinder diesel engine that corresponds to the EPA tier-4 regula-
tions (optional)
• Tipping trailer
• High-tip skip (option)
• Self-loading equipment (option)
• Front skip (option)
• Swivel skip (option)
• Skip for lightweight load (optional)
Definition of operator’s control stand
The dumper’s control stand is the:
• Foothold
• Control stand
The vehicle may only be operated from the running board and control stand.
The operator must not lean or reach outside the dimensions of the vehicle.
This applies in particular to their feet! Otherwise –
Accident hazard!
☞Stand on the foothold ensuring that neither your feet nor other limbs pro-
trude beyond the dimensions of the vehicle!
The operator must always firmly hold onto the handle of the control stand with
both hands! Otherwise –
Accident hazard!
☞The operator is subject to high acceleration forces in particular when start-
ing vehicle travel!
1.4 Regulations
Requirements to be met by the operator
Earth moving machines may be driven and serviced only by persons who meet the follow-
ing requirements:
• 18 years or older
• Physically and mentally suited for this work
• Persons have been instructed in driving and servicing the earth moving machine and
have proven their qualifications to the contractor
• Persons are expected to perform work reliably.
They have been appointed by the contractor for driving and servicing the earth moving
machine.
Observe the legal regulations of your country.
To Next Page
Loading...
Need help?
General
