Wacker Neuson DT10 User Manual

5-8 BA DT10 en - Edition 1.5 * * dt10b510.fm
Maintenance
Drain fuel
The filler inlet of tank C is located under the fuel tank.
☞Perform the starting aid as follows:
• Clean the area around filler cap C with a lint-free cloth
• Place a sufficiently large container under the place where the fuel is drained
• Open filler cap C
• Wait for a moment (about 3 minutes) until the oil has been completely drained from
the tank.
• Close filler cap C
Environment!
Use a suitable container to collect the fuel as it drains and dispose of it in an
environmentally friendly manner.
Danger!
All work involving fuel carries an increased
fire and poisoning risk!
☞Do not refuel in closed rooms.
☞Never perform work on the fuel system near open flames or sparks.
Environment!
Use a suitable container to collect the fuel as it drains and dispose of it in an
environmentally friendly manner!
C
Fig. 72: Drain fuel

Wacker Neuson DT10 Specifications

General

Brand	Wacker Neuson
Model	DT10
Category	Construction Equipment
Language	English