EasyManua.ls Logo

Wacker Neuson DT10

Wacker Neuson DT10
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-16 BA DT10 en - Edition 1.5 * * dt10b520.fm
Maintenance
Replacing the filters
Exchange filter cartridge A as follows:
Stop the engine
Remove the key and carry it with you
Let the engine cool down
Switch off the vehicle
Remove dirt and dust from the air filter and the area around the air filter
Remove cover B
Carefully remove filter cartridge A with slightly turning movements
Ensure that all dirt (dust) inside cover B, including dust valve C, has been removed
Clean the parts with a clean lint-free cloth, do not use compressed air
Check the air filter cartridges for damage. DO NOT CLEAN the cartridges! Install only
intact and clean filters.
Insert the new filter cartridge A carefully
Ensure that all dirt (dust) inside cover B has been removed
Position cover B (ensure that it is properly seated)
Notice!
Ensure that dust valve C shows downward as you install it!
Environment!
Dispose of filter cartridge A in an environmentally friendly manner.
Fig. 81: Replacing the filter
A
B
C

Table of Contents

Related product manuals