BA DT10 en - Edition 1.5 * dt10b530.fm 5-31
Maintenance
Instructions concerning specific components
Electric lines and fuses
Always observe the following instructions:
• Malfunctioning components of the electrical system must always be replaced by a
Wacker Neuson service center. Fuses may be changed by unqualified persons
• When performing maintenance on the electrical system, pay particular attention to
ensuring good contact in leads
Alternator
Always observe the following instructions:
• Only test run the engine with the battery connected.
• When connecting the battery, ensure that the poles (+/–) are not inverted.
• Always disconnect the battery before performing welding work or connecting a quick
battery charger.
Operation of electric consumers (for example the lighting equipment) is prohibited.
This is why the vehicle has no socket.
To Next Page
Loading...
