5-34 BA DT10 en - Edition 1.5 * * dt10b530.fm
Maintenance
Exterior of the vehicle
Cleaning the vehicle can cause engine damage.
☞Protect the engine against humidity
The following articles are generally suitable:
• High-pressure cleaner
• Steam jet
Engine compartment
Clean the engine only when it is at a standstill –
Risk of injury!
☞Stop the engine before cleaning it.
When cleaning the engine with a water or steam jet:
☞The engine must be cold
☞and do not point the jet directly at electric sensors such as the oil pressure
switch.
The humidity penetrating any such sensors causes them to fail and leads to
engine damage!
Threaded fittings and attachments
All threaded fittings must be checked regularly for tightness, even if they are not listed in
the maintenance plans.
☞Engine fastening screws
☞Fastening screws on the hydraulic system
☞Line and pin fastenings on the attachment
Immediately tighten loosened connections; Contact an authorized workshop if necessary.
Pivots and hinges
Lubricate all mechanical pivots on the vehicle (such as joints) and fittings at regular inter-
vals even if they are not listed in the lubrication plan.
To Next Page
Loading...
