EH 6, EHB 7 8 Operation
45
8.6 Vibration reduction
f Press machine against the area you wish to work on. The vibration reduction
can be compressed approx. to the middle position.
CAUTION
Too little spring travel at handle.
Injuries due to too severe kickback.
f Do not press machine all the way up to the stop of the vibration reduction
and against the area you wish to work on.
NOTICE
Uncontrolled kickback.
Damages due to slipping tool or tool breaking to the left or right.
f Press machine more heavily against the area you wish to work on.
Item Designation
1 Vibration reduction
To Next Page
Loading...