10 Maintenance EH 6, EHB 7
48
10 Maintenance
10.1 Maintenance schedule
Note: Take the machine to your Wacker Neuson contact partner for servicing
when the red service light lights up.
WARNING
Improper handling can result in injury or serious material damage.
f Read and follow all safety instructions of this operator's manual, see chapter
Safety information.
Task Daily before
operation
Monthly
Check power cable for perfect
condition – if power cable is
defective, have it replaced. *
* Have these tasks carried out by the service department of
your Wacker Neuson contact person.
Visual inspection of all parts
for damage.
Clean the machine.
Check the tool end and cut-
ting edges – if required,
sharpen, reforge or replace.
Check tool holder for wear –
have it changed, if
necessary. *
To Next Page
Loading...