RD 12A Operation
wc_tx001071gb.fm 39
Note: The ignition switch has an anti-restart feature. If the engine does
not start, the switch will need to be turned to the OFF position before it
will allow the engine to be cranked again.
4.18.6 Gradually place the choke lever in the OPEN position as the engine
warms up. Allow the engine to warm up for a few minutes before
operating the roller.
4.18.7 Before moving the machine, release the parking brake by lowering the
brake lever.
4.18.8 Quickly press and release the upper half of the throttle switch (54) to
bring the engine to high throttle.
Prolonged exposure to high noise levels can damage your hearing.
Wear appropriate hearing protection while operating the roller.
WARNING
To Next Page
Loading...
Need help?
General
