Labels CT24-4A
16 wc_si000505gb.fm
E
WARNING!
Cutting hazard. Always replace blade guard!
F
Variable speed throttle
G
CAUTION!
Read and understand the supplied Operator’s Manual
before operating this machine. Failure to do so
increases the risk of injury to yourself and others.
H
NOTICE
Lifting point.
A nameplate listing the model number, item number,
revision number, and serial number is attached to each
unit. Please record the information found on this plate
so it will be available should the nameplate become lost
or damaged. When ordering parts or requesting service
information, you will always be asked to specify the
model number, item number, revision number, and
serial number of the unit.
Label Meaning
To Next Page
Loading...