64
Index
Contents
64
Index
Contents
Interactive pen display
INSTALLING MULTIPLE TABLETS
The TABLET list displays an icon for any supported pen display or tablet that has been detected on your
system, and allows you to select the pen display or tablet for which your changes will apply.
To add a new pen display or tablet
, connect it to your computer. For USB products, the system searches
the USB ports. When the new pen display or tablet is found, it is automatically initialized.
Important: When installing additional pen displays or tablets on Windows systems, please note that the
eraser function may not work in some applications when using the additional pen display(s) or
tablet(s). The eraser function will continue to work correctly using the first unit that was added to the
control panel.
To remove one of multiple tablets from the driver
, in the Wacom Tablet control panel select the pen display
or tablet icon to be deleted and click on the [ – ] button next to the T
ABLET list.
• A pen display or tablet cannot be deleted from the control panel list unless it is attached to the
computer.
• Note that you will need to restart your computer before you can again add the pen display or tablet to
the driver.
Select a pen display or tablet icon for
which to customize pen and application
settings.
• The control panel will not launch
unless a supported pen display or
tablet is connected to the computer.
• Settings can only be viewed or
changed for an attached pen display
or tablet.
To Next Page
Loading...
Need help?
General
