WACOM DTU-1631 User Manual

55
Index
Contents
55
Index
Contents
Interactive pen display
MACINTOSH-SPECIFIC PROBLEMS
At startup, a dialog box
appears telling you that either
the driver failed to load or the
pen display preferences have
not yet been created.
The tablet portion of the pen display was not detected at startup.
Make sure the USB interface cable is securely connected to an active
USB port on your computer or to a USB hub. Make sure that the pen
display power LED is on. If this does not correct the problem, see
troubleshooting
.
From the G
O menu, select the UTILITIES folder and launch the SYSTEM
P
ROFILER. Select USB from the HARDWARE section of the CONTENTS list.
A Wacom USB pen display model should be listed. If a pen display
model is not listed, check the pen display USB cable connection or try
plugging the pen display into a different USB port.
If this does not help, contact Wacom for Technical Support.
See technical support options
.
You suspect the pen display
preferences may be
corrupted, or want to make
certain that all settings are at
their factory defaults.
Use the Wacom Tablet Utility to work with your preferences. Close any
open applications. Open the main A
PPLICATIONS folder. Then open the
W
ACOM TABLET folder and run the WACOM TABLET UTILITY.
• It is a good idea to first back up your tablet preferences. In the
W
ACOM TABLET UTILITY dialog box, select CURRENT USER or ALL
USERS. Then click BACKUP... and follow the prompts.
• Then, delete the tablet preferences as follows:
Single user
. When the utility starts, select CURRENT USER and click
on the R
EMOVE button. Log out, then log back in. When the pen
display driver loads it will create a new preferences file with the
factory defaults.
Multiple users
. When the utility starts, select ALL USERS and click
on the R
EMOVE button. Log out, then log back in. When the pen
display driver loads it will create new preferences files with the
factory defaults.
You can quickly restore tablet preferences that have been backed up
for the C
URRENT USER or ALL USERS by clicking on the RESTORE... button
within the utility.
Note: Do not manually remove the W
ACOM TABLET.PREFPANE file from
the main L
IBRARY PREFERENCEPANES folder. This file is only to be
removed when uninstalling the Wacom software driver, and then
only when using the W
ACOM TABLET UTILITY.
Recalibrate the pen display.

WACOM DTU-1631 Specifications

General

Brand	WACOM
Model	DTU-1631
Category	Graphics Tablet
Language	English