What to do if my Waeco CoolMatic CR 50 Refrigerator compressor is not running when connected to AC supply?
- DdbrownAug 2, 2025
If your Waeco Refrigerator's compressor isn't running when connected to an AC supply, it could be due to several reasons. First, check for any interruptions in the supply cable and establish a secure connection. If there's a main switch installed, verify if it's faulty and replace it if necessary. Also, inspect the additional supply line fuse; if it has blown, replace it. Finally, there might be an issue with the compressor itself, specifically an interrupted electric circuit between the pins, which would require replacing the compressor.