EasyManua.ls Logo

Waeco coolmatic hdc-190 - User Manual

Waeco coolmatic hdc-190
140 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CoolMatic
HDC-190, HDC-220
D6Kühlschrank
Bedienungsanleitung
GB 20 Refrigerator
Instruction Manual
F33Réfrigérateur
Notice d’emploi
E47Nevera
Instrucciones de uso
I 61 Frigorifero
Istruzioni per l’uso
NL 75 Koelkast
Gebruiksaanwijzingen
DK 89 Køleskab
Betjeningsanvisning
N102Kylskåp
Bruksanvisning
S114Kjøleskap
Bruksanvisning
FIN 127 Jääkaapp
Käyttöohjeet
hdc190-220.book Seite 1 Montag, 27. September 2010 3:40 15

Table of Contents

Questions and Answers

  • G
    Gary ComptonAug 2, 2025
    Why is my Waeco coolmatic hdc-190 compressor not running?
    • J
      James PaulAug 3, 2025
      Several factors can prevent your Waeco Refrigerator's compressor from running. It could be due to an interrupted connection between the battery and the electronics (establish a connection), a defective main switch (replace the main switch), a blown fuse (replace the fuse), low battery voltage (charge the battery), loose or corroded cables (establish a connection), insufficient battery capacity (replace the battery), an undersized cable (replace the cable), high ambient temperature, insufficient ventilation (move the refrigerator), a dirty condenser (clean the condenser), a defective fan (replace the fan), or an interrupted electric circuit in the compressor (replace the compressor).
  • N
    Nancy MillerAug 10, 2025
    What to do if cooling capacity drops and interior temperature rises in Waeco Refrigerator?
    • S
      Sean GonzalezAug 10, 2025
      If the cooling capacity of your Waeco Refrigerator drops and the interior temperature rises, the vaporizer may be iced over (defrost the vaporizer). Also, check if the cooling area insulation is insufficient (adjust/replace the door seal), the ambient temperature is too high, ventilation is insufficient (move the refrigerator), the condenser is dirty (clean the condenser), the fan is defective (replace the fan), or the battery capacity is exhausted (charge the battery).
  • A
    andrea84Aug 17, 2025
    How to fix too low interior temperature in Waeco coolmatic hdc-190 at control setting “1”?
    • R
      Ricardo FreemanAug 17, 2025
      If the interior temperature of your Waeco Refrigerator is too low at control setting “1”, it could be because the thermostat sensor has no contact with the vaporizer (secure the sensor) or there is a short circuit in the thermostat line, or the thermostat is defective (change the thermostat).
  • M
    Mrs. Shelby Thompson MDAug 26, 2025
    What to do if Waeco Refrigerator makes unusual noises?
    • D
      Denise LynchAug 26, 2025
      Unusual noises from your Waeco Refrigerator can be caused by a component of the refrigerant circuit that cannot move freely (bend the component carefully) or a foreign body jammed between the cooling device and the wall (remove the foreign body). Fan noise can also be a source.

Summary

Notes on Using the Instruction Manual

Safety Instructions

General Safety

Covers general safety precautions, installation, repair, and environmental considerations.

Intended Use

Technical Description

Using the Refrigerator

Connecting to a Battery

Explains how to connect the refrigerator to a 12 V or 24 V DC power supply.

Connecting to 230 V Mains Supply

Details how to connect the refrigerator to a 230 V AC mains supply using a rectifier.

Setting the Temperature

Instructions on how to adjust the cooling temperature using the thermostat knob.

Cleaning and Maintenance

Troubleshooting

Technical Data

Waeco coolmatic hdc-190 Specifications

General IconGeneral
BrandWaeco
Modelcoolmatic hdc-190
CategoryRefrigerator
LanguageEnglish

Related product manuals