EasyManua.ls Logo

Waeco MOBITRONIC MBC-16IU - Using the Compact Charger

Waeco MOBITRONIC MBC-16IU
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using the compact charger MBC-8IU, MBC-16IU
34
The following operating elements can be found on the back of the compact
charger:
6 Using the compact charger
Caution!
Batteries with a cell short circuit may not be charged. There is a
danger of explosions due to the explosive gases.
Nickel-cadmium batteries and non-rechargeable batteries may not
be charged with the compact charger. The sleeves of these
batteries can burst in an explosive manner.
6.1 Connecting the compact charger
Caution!
The compact charger must be installed in a place that is protected
from moisture and humidity.
Ensure that
No flammable materials or gases are in the vicinity
The installation location is well ventilated and
The mounting surface is flat and sufficiently firm.
The air intake and outlet openings of the compact charger must be
kept clear.
Caution!
Disconnect the mains plug before connecting or disconnecting the
DC voltage connection.
No. in
fig. 2,
page 3
Description Explanation
1 Mains cable Connection to the mains voltage supply
2 Storage
compartment
For storing the charging cable
3 Error code table For quick error searches
4 Charging cable For connecting to the battery
MBC-8IU_16IU.book Seite 34 Dienstag, 6. September 2005 3:38 15

Table of Contents

Related product manuals