Why does my Wagan PURE LINE 1000 Inverter shut down and the Fault LED is lit?
Your Wagan Inverter might shut down with the Fault LED lit because the equipment you're using draws too much power. To resolve this, stop using the equipment with the inverter or switch to a higher wattage inverter.
How to fix low or no output voltage on a Wagan Inverter with the Fault LED lit?
If your Wagan Inverter has low or no output voltage and the Fault LED is lit, it might be due to poor contact with the battery or inverter terminals. Clean the terminals thoroughly, then reinstall and tighten them.
What to do if my Wagan PURE LINE 1000 auto shuts down and the Fault LED is lit?
If your Wagan Inverter automatically shuts down and the Fault LED is illuminated, it could be due to a couple of reasons: 1. The battery voltage might be below the rated value. In this case, charge or replace the battery. 2. The inverter might be too hot, triggering a thermal shutdown. Let the inverter cool down, ensure it has adequate ventilation, and reduce the load to the specified TrueRated™ power max output.
Why is my Wagan Inverter making a continuous buzzing sound?
A continuous buzzing sound from your Wagan Inverter can stem from several causes: * The input voltage might be below the rated value, so keep it above the rated value. * The battery condition may be poor or weak, so recharge or replace the battery. * There could be a poor or loose cable connection. Inspect terminals and tighten all connections. * Inadequate power may be delivered to the inverter or excessive voltage drop. Use heavier gauge DC cables and keep the cable length as short as possible.
What to do if my Wagan PURE LINE 1000 Inverter shuts down and the Yellow LED is lit?
If your Wagan Inverter shuts down and the Yellow LED is lit, the GFCI may have tripped. To reset it, disconnect the appliances, turn the ON/OFF switch to the off position, and then turn it back on.
Information on the proper disposal and recycling of electronic products to mitigate environmental impact.
Specifies the product warranty period, typically two years from the original purchase date.
Details how defective products are handled during the warranty period, including replacement or repair options.
Outlines limitations and exclusions of the warranty, disclaiming all other expressed or implied warranties.
Explains the procedure for returning items, emphasizing the need for a Return Authorization number (RA#).
To Next Page
General
