WAGNER AG-19 - Page 26

26
AG 19
GB
Replacing/Removing the Filter
1. Loosen the tting (1) with a wrench and pull the lter compartment (2)
and lter (3) out of the gun.
2. Take the old lter out of the lter compartment.
3. Insert the new lter, with the narrow end facing upwards, into the lter
compartment.
4. Place the handle seal (4) into the gun head with the at side of the seal
toward the gun head.
5. Insert the lter compartment (2) back into the gun and screw it securely
into place.
1
2
3
4
Flat side of
handle seal
(toward gun head)
Bev
elled side of
handle seal
(toward handle)