To Next PageTo Next Page
Need help?Do you have a question about the WAGNER Airless Sprayer Plus 0418 and is the answer not in the manual?
General| Type | Airless Paint Sprayer |
|---|---|
| Max Pressure | 3000 PSI |
| Max Flow Rate | 0.24 GPM |
| Weight | 15 lbs |
| Hose Length | 25 ft |
| Power Source | Electric |
| Voltage | 120V |
| Tip Size | 0.015 in |
Airless units develop extremely high spraying pressures, posing a risk of injection injury.
Never point the spray gun at yourself or others; always use safety guards.
Explains symbols and provides general warnings for safe operation.
Covers keeping the work area clean, lit, and safe from electrical hazards.
Focuses on operator alertness, PPE, tool maintenance, and safe usage.
Addresses protection from paint mist, flammables, explosions, static, and ventilation needs.
Covers spray gun recoil, operating pressure, coating substance hazards, and device connection.
Details hose integrity, injection risks, maintenance, electrical resistance, and part recommendations.
Lists usable and unsuitable materials, and the field of application.
Provides detailed technical data including voltage, pressure, flow rate, and weight.
Lists the sprayer's components and the tools required for assembly.
Step-by-step guide for assembling the sprayer unit.
Guidance on straining paint and selecting appropriate gun filters.
Covers locking the gun, plugging in the sprayer, and pressure relief procedures.
How to prepare the pump for operation, including filter placement and hopper filling.
Steps to draw material into the system, purging air or water effectively.
How to test the spray pattern and ensure correct application.
Tips on maintaining distance, speed, and angles for an even coating.
Steps to clear obstructions from the spray tip for a proper spray pattern.
Instructions for cleaning the spray gun filter and the hopper's inlet filter.
Emphasizes thorough cleaning and lubrication for optimal performance.
Steps for emptying the hopper, purging the paint hose, and rinsing components.
Procedure to circulate cleaning solution through the entire system.
Detailed instructions for cleaning spray gun components and the inlet valve.
Steps for unscrewing and replacing the outlet valve assembly.
Procedures for shutting down and safely storing the sprayer for up to 8 hours.
Steps for cleaning, lubricating, and storing the sprayer for extended periods.
Daily and extended maintenance, including part replacement.
Lists common sprayer problems, their causes, and step-by-step solutions.
Identifies and lists quantities for spray gun components.
Identifies and lists quantities for the main sprayer unit and its accessories.
Details the terms and conditions of the 2-year product guarantee.
Covers environmental protection, product liability, and electrical safety warnings.
