CONTENTS
Paragraph Chapter.Page
1 INTRODUCTION 1.1
1.1 Using the manual 1.1
1.2 SAFETY REGULATIONS 1.2
1.3 PTB Conformity certification 1.4
1.4 Product liability and guarantee 1.5
1.5 CE conformity 1.6
2 DESCRIPTION 2.1
2.1 Scope of supply 2.1
2.2 Technical data 2.1
2.3 Functional description 2.1
2.3.1 Function of the gun 2.1
2.3.2 AirCoat round jet process 2.3
2.3.3 AirCoat flat jet process 2.3
2.3.4 Electrostatic effect 2.4
2.4 What kind of spraying material can be applied? 2.4
3 PREPARATION BEFORE STARTING WORK 3.1
3.1 Preparation of paint 3.1
3.2 Earthing 3.1
4 STARTING WORK, AND HANDLING 4.1
4.1 Preparation 4.1
4.2 General rules for handling the spray gun 4.1
4.3 Starting-up for AirCoat spraying 4.1
4.4 Cleaning of clogged round jet tips 4.2
4.5 Exchange of AirCoat round jet tip insert. (EAC round) 4.2
4.6 Changing from AirCoat round jet to AirCoat flat jet 4.2
4.7 Replacing AirCoat flat jet tips 4.3
4.8 Cleaning of AirCoat flat jet tips 4.3
4.9 Clogging of AirCoat flat jet tips 4.3
5 MAINTENANCE 5.1
5.1 Decommissioning and cleaning 5.1
5.2 Dissassembly of AirCoat nozzle body 5.2
5.3 Exchange or cleaning of filters 5.2
5.4 Adjustment of the valve rod seal 5.3
5.5 Exchange of complete valve rod, or of valve rod seals 5.3
5.6 Exchange of paint channel 5.4
6 TROUBLE SHOOTING AND SOLUTIONS 6.1
GM 2000 EAC - EN
0.1
To Next Page
Loading...
Need help?
General
