16
40 ccm - 300 ccm.
SERVICE MANUAL
EDITION 01/2012 PART NO. DOC367866
4.2.3 TECHNICAL DATA
4.2.3.1 TECHNICAL DATA FOR WILDCAT, PUMA
Description
Units WILDCAT
10-70
WILDCAT
18-40
PUMA
28-40
PUMA
15-70
PUMA
21-110
PUMA
15-150
Transmission ratio 10 :1 18 :1 28 : 1 15 :1 21:1 15 :1
Flow volume per double stroke (DS) cm³; cc 70 40 40 70 110 150
Maxi. operating over pressure MPa
bar
psi
8
80
1160
14.4
144
2089
22.4
224
3249
12
120
1740
16.8
168
2436
12
120
1740
Maxi. possible strokes in operation DH/min
DS/min
60 60 60 60 60 60
Min. Maxi. incoming air pressure MPa
bar
psi
0.25-0.8
2.5-8
36-116
0.25-0.8
2.5-8
36-116
0.25-0.8
2.5-8
36-116
0.25-0.8
2.5-8
36-116
0.25-0.8
2.5-8
36-116
0.25-0.8
2.5-8
36-116
Ø Incoming air (inside threads) Zoll Inch G 1/2“ G 1/2“ G 1/2“ G 1/2“ G 1/2“ G 1/2“
Min. Ø compressed air hose mm; Inch 9; 0.354 9; 0.354 9; 0.354 9; 0.354 9; 0.354 9; 0.354
Air consumption at 0.6 MPa; 6 bar; 87
psi per DS
nl
scf
5.3
0.19
5.3
0.19
8.3
0.29
8.3
0.29
16.5
0.58
16.5
0.58
Sound pressure level at maxi.
permissible air pressure*.
dB(A) 77 77 78 77 78 78
Sound pressure level at 0.6 MPa; 6
bar; 87 psi air pressure*
dB(A) 74 74 74 74 74 74
Sound pressure level at 0.4 MPa; 4
bar; 58.01 psi air pressure*
dB(A) 69 69 69 69 69 69
Ø piston of air motor mm; Inch 80; 3.2 80; 3.2 100; 4 100; 4 100; 4 100; 4
Mat. inlet connection (inside threads) Zoll Inch G 1“ G 3/4“ G 3/4“ G 1“ G 1“ G 1“
Material outlet connection (inside
threads)
Zoll Inch G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 3/8“ G 3/8“
Weight kg; lb 17; 38 15; 33 16; 35 18; 40 28; 62 28; 62
Material pH value pH 3.5 ÷ 9
Maxi. material pressure at pump inlet MPa;bar; psi 2; 20; 290
Material temperature °C; °F +5° ÷ +80°; +41 ÷ +176
Ambient temperature °C; °F +5° ÷ +60° +41 ÷ +140
Allowable sloping position at work <) ° ± 10
* A rated sound pressure level measured at 1 m distance according to DIN EN 14462: 2005.
Reference measurements have been made by SUVA (Swiss accident insurance institute).
WARNING
Outgoing air containing oil!
Risk of poisoning if inhaled
Function problem airmotor
Provide water-free and oil-free compressed air (quality standard
5.5.4 as per ISO 8573.1) 5.5.4 = 40 μm / +7 / 5 mg/m³.
SIHI_0068_GB