80
PXM
P_02537
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
18. Press "FP pump Intensive On" button.
A combined cleaning program with pump and blowout pulses is running according
to the time set in the pump.
19. The end of fresh powder pump cleaning is displayed by a white "Clean FP pump On"
button and a yellow "Clean FP pump Off" button.
Home page
Cleaning
Settings
Alarm
Worker
Injector
On
On
On
O
O
O
End
On O
FP pump standard
On O
FP pump intensive
US Sieve
RP hose
20. Clean the peristaltic pump.
Open cyclone and swivel out sieve (pictured left).
Plug the reclaimed powder hose onto the blowout coupling (pictured right).
To Next Page
Loading...
Need help?
General
