81
PXM
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
Press "RP hose cleaning On" button to start cleaning the reclaimed powder hose.
The end of reclaimed powder hose cleaning is displayed by a white "Clean RP hose
On" button and a yellow "Clean RP hose O " button.
21. Press the "End" button to finish cleaning.
22. Blow out the cyclone and the cyclone sieve.
23. Close the cyclone funnel several times, wait 15 seconds, open and blow out to
remove residual dust from the cyclone.
Home page
Cleaning
Settings
Alarm
Worker
Injector
On
On
On
O
O
O
End
On O
FP pump standard
On O
FP pump intensive
US Sieve
RP hose
To Next Page
Loading...
Need help?
General
