WAGNER VM 2000 - Troubleshooting and Maintenance

17
VM 2000
(6-
/&&
+6
M
/.






















6-






"?
OPERATING MANUAL
EDITION 03 /2007
PART NO. DOC0388871
6 TROUBLESHOOTING AND MAINTENANCE
Problem Cause Solution
Green LEDs (3) (4) do not
light up
• Mains power not switched on
• 0.5 / 1.6 A slow-blow fuses
defective
• Switch on mains power supply
• Replace fuses
Red LED (5) lights up (no
high-voltage supply)
• HVM-mdule defective • Inform your local WAGNER Service
Center
Red LED (6) lights up (no
high-voltage supply)
• Open circuit in the connecting
lead to the spray gun
• Earth connection between control
unit and spray gun interrupted
• Connecting lead can be replaced by
WAGNER Service
• Inform your local WAGNER Service
Center