WAGNER W 350 User Manual

9
W 350
AUS
Spare Parts List (Fig. 9)
10 Container seal 2323 039
11 Suction tube 2362 876
12 Container with cover 0413 909
13,14,15 Ventilating hose, valve cover, diaphragm 2304 027
16 Stir stick 2304 419
17 Lubricating grease (no g.) 2315 539
15. Accessories
The CLICK&PAINT SYSTEM with additional spray attachments and accessories oers
the right tool for each work.
Further information about the WAGNER range of products for renovating is
available under www.wagner-group.com
16. Correction of Malfunctions
Problem Cause Remedy
No coating
material
emerges from
the nozzle
•
Nozzle clogged
•
Feed tube clogged
•
Material volume too small
•
Feed tube loose
•
No pressure build-up in container
➞ Clean
➞ Clean
➞ Increase the quantity of
material
➞ Insert
➞ Tighten container
Coating
material drips
from the nozzle
•
Nozzle loose
•
Nozzle worn
•
Nozzle seal is missing or worn
•
Coating material assembly at air
cap, nozzle or needle
➞ Tighten
➞ Change
➞ Insert an intact nozzle seal
➞ Clean
Atomisation too
coarse
•
Viscosity of coating material too
high
•
Material volume too large
•
Nozzle contaminated
•
Air lter heavily soiled
•
Too little pressure build-up in
container
➞ Thin
➞ Reduce the material
➞ volume
➞ Clean
➞ Change
➞ Tighten container
Spray jet
pulsates
•
Coating material in container
running out
•
Air lter heavily soiled
•
Nozzle seal is missing or worn
➞ Rell
➞ Change
➞ Insert an intact nozzle seal

WAGNER W 350 Specifications

General

Brand	WAGNER
Model	W 350
Category	Paint Sprayer
Language	English