21
W 590 Flexio
EN
26. Environmental protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
27. Important Note regarding Product Liability!
...................................36
1. Explanation of symbols used
This symbol indicates a potential danger for you or for the device.
Under this symbol you can nd important information on how to
avoid injuries and damage to the device.
Danger of electrical shock
Indicates tips for use and other particularly useful information.
2. General Safety Instructions
WARNING! Read all safety information, instructions, illustrations and technical data
provided with this power tool. Failure to observe the following instructions
may cause electric shock, re and/or severe injuries. Keep all safety information
and instructions for future reference. The term “power tool” used in this safety
information refers to mains-operated power tools (with power cable) and to
battery-powered power tools (without power cable).
1. Safety at the workplace
a) Keep your workplace clean and well lit. Disorder or unlit workplaces may result in
accidents.
b) Do not work with the power tool in potentially explosive environments
where there are ammable uids, gases or dust. Power tools generate sparks
that can ignite the dust or vapors.
c) Keep children and other persons away when using the power tool. If
distracted, you may lose control of the power tool.
2. Electrical Safety
a) The connection plug of the power tool must t in the socket. The plug may not
be modied in any form. Do not use adaptor plugs together with protective-
earthed tools. Unmodied plugs and suitable sockets reduce the risk of an electric shock.
b) Avoid physical contact with earthed surfaces such as pipes, heating elements,
stoves and refrigerators. The risk through electric shock increases if your body is
earthed.
To Next Page
Loading...
Need help?
General
