WAGNER W 590 FLEXIO

25
W 590 Flexio
EN
4. Description/ Scope of delivery
Description/ Scope of delivery (Fig. 1)
1) Nozzle 2) Air cap (to set the working direction)
3) Union nut 4) Spray jet width adjustment
5) Wall Extra I-Spray spray attachment 6) Material volume adjustment
7) Air volume control 8) Spray gun rear part
9) Air lter cover 10) ON/OFF switch (located on both sides)
11) Trigger 12) Mains lead
13) Container 14) Valve
15) Ventilating hose 16) Stirring rod
17) Feed hopper (2 pcs.) 18) Practice poster
19) Standard spray attachment 20) Replacement nozzle seal (Standard
spray attachment)*
21) Lubricating grease* 22) Lubricating grease*
* This is inside the container: remove it before starting operations!
5. Field of application
Many dierent coating substances can be processed with the W 590.
A dierent spray attachment must be used, depending on the coating substance:
Coating Materials Spray attachment
Low-viscosity coating substances: Low-viscosity coating substances:
Water- and solvent-based paints, nishes,
primers, 2-component paints, clear
nishes, automotive nishes, staining
sealers and wood sealer-preservatives.
Standard
Interior wall paint (dispersions and latex
paint)
Wall Extra I-Spray
6. Coating Materials Suitable for Use
Interior wall paint (dispersions and latex paint)
Water- and solvent-based paints, nishes, primers, 2-component paints, clear nishes,
automotive nishes, staining sealers and wood sealer-preservatives.