WAGO 750-806 User Manual

WAGO-I/O-SYSTEM 750
Manual
750-806
Fieldbus Controller DeviceNet
TM
16-
bit CPU
Version 2.0.0

WAGO 750-806 Specifications

General

Brand	WAGO
Model	750-806
Category	Controller
Language	English

Summary

Important Notes

Safety Advice (Precautions)

Essential safety precautions for installing and operating the device in your system.

System Description

Power Supply

Details on the system's power supply, including isolation, system supply, and field supply.

Commissioning

Setting the DeviceNet™ Station Address and Baud Rate

Procedure for setting the DeviceNetTM station address and baud rate using DIP switches.

Configuring Static and Dynamic Assemblies

Steps to configure static and dynamic assemblies using RSNetWorx software.

Programming the PFC Using WAGO-I/O-PRO

Configuring the Fieldbus Controller using the I/O Configurator

Steps to configure the fieldbus controller using the integrated I/O Configurator.

Transfer the IEC program to the Fieldbus controller

Methods for transferring IEC programs to the fieldbus controller via serial port or fieldbus.

Transfer via Serial Service Port

Fieldbus Communication

DeviceNetTM

Introduction to DeviceNetTM, its characteristics, and network concepts.

Network Structure

Network Communication

Configuration and Parameterization Using the Object Model

Use in Hazardous Environments

Special Conditions for Safe Use (ATEX Certificate TÜV 07 ATEX 554086 X)

Specific conditions for safe use according to ATEX certificate TÜV 07 ATEX 554086 X.

Special Conditions for Safe Use (IEC-Ex Certificate TUN 09.0001 X)

Specific conditions for safe use according to IEC-Ex certificate TUN 09.0001 X.

Special Conditions for Safe Use According to ANSI/ISA 12.12.01

Safety conditions for use according to ANSI/ISA 12.12.01 standards.