Need help?Do you have a question about the WAGO 752-823 and is the answer not in the manual?
General| Number of Channels | 8 |
|---|---|
| Input Voltage | 24 V DC |
| Switching Frequency | 1 kHz |
| Protection Type | IP20 |
| Mounting Type | DIN Rail |
| Width | 12 mm |
| Height | 100 mm |
| Product Type | I/O Module |
| Supported Protocols | Modbus TCP |
| Operating Temperature | -20 to +60 °C |
| Storage Temperature | -40 to +85 °C |
| Relative Humidity | 95% (non-condensing) |
Details PROFIBUS DP system parameters and specifications.
Specifies module supply voltage, current, power loss, and wiring details.
Specifies input and output parameters, ratings, and operational characteristics.
Outlines environmental, mechanical, electrical safety, and EMC specifications.
Details the fieldbus interface connection.
Outlines necessary cabling specifications for the PROFIBUS.
Provides an overview of PROFIBUS and the role of GSD files for configuration.
Explains parameterization and configuration using identifier bytes for inputs/outputs.
Details diagnosis procedures and device status information.
Describes the structure of input and output process data images.
To Next Page
