Need help?Do you have a question about the WAGO 752-323 and is the answer not in the manual?
Describes the base module, its function as an interface for external wiring.
Describes the plug-in electronic module containing processing and interface circuits.
Details the physical installation steps for the module onto a carrier rail.
Covers the electrical connections, including power and signal wiring.
Details the parameterization of the I/O module by the master controller.
Explains how inputs and outputs are configured using identifier bytes.
Describes the base module, its function as an interface for external wiring.
Describes the plug-in electronic module containing processing and interface circuits.
Details the physical installation steps for the module onto a carrier rail.
Covers the electrical connections, including power and signal wiring.
Details the parameterization of the I/O module by the master controller.
Explains how inputs and outputs are configured using identifier bytes.
General| Fieldbus | CANopen |
|---|---|
| Nominal supply voltage | 24 VDC |
| CANopen node number | 1 ... 127 |
| Protection type | IP20 |
| Input Type | Digital |
| Voltage Range/Input Voltage | 24 VDC |
To Next Page
