To Next PageTo Next Page
Need help?Do you have a question about the WAGO 750-881 and is the answer not in the manual?
General| Product Name | WAGO 750-881 |
|---|---|
| Category | I/O Systems |
| Fieldbus | Ethernet |
| Programming | IEC 61131-3 |
| Supply Voltage | 24 V DC |
| Relative Humidity | 95 % (non-condensing) |
| Type | Controller |
| Number of I/O Modules | 64 |
| Memory | 64 MB RAM |
| Interfaces | 2 x RJ-45 |
| Operating Temperature | 0 °C to +55 °C |
| Dimensions | 100 mm x 100 mm |
| Protocols | EtherNet/IP |
Defines the scope and applicability of the documentation.
Outlines copyright protection and usage restrictions for the manual.
Explains the meaning of various safety and informational symbols used in the document.
Details the conventions for number notation and text formatting used throughout the manual.
Covers legal aspects like subject to changes and personnel qualifications.
Details requirements for specified devices and company liability.
Provides critical safety instructions and precautions for installing and operating the system.
Details the physical arrangement, module placement, and electrical connections of the WAGO-I/O-SYSTEM.
Lists essential steps including software installation and network configuration before programming.
Guides through project creation, hardware configuration, and application logic writing.
Explains loading the program, starting execution, and creating a boot project for the PLC.
Describes creating and displaying graphical user interfaces for monitoring and control.
Details the use of memory cards for expanding PLC storage capacity.
Explains how to access the SD card using an FTP client for data transfer.
