To Next PageTo Next Page
Need help?Do you have a question about the WAGO 753-647 and is the answer not in the manual?
General| Product Type | Control Unit |
|---|---|
| Model Number | 753-647 |
| Manufacturer | WAGO |
| Number of Channels | 8 |
| Input Voltage | 24 V DC |
| Output Voltage | 24 V DC |
| Relative air humidity | 95 % (non-condensing) |
| Height | 100 mm |
| Depth | 100 mm |
| Protection Class | IP20 |
| Data transfer rate | 100 Mbit/s |
| Operating temperature | +55 °C |
| Insulation voltage | 500 V |
Essential safety precautions for installing and operating the device.
Details PC hardware and software requirements for using the module.
Lists the necessary PC hardware specifications for configuration.
Lists required and optional PC software for the module.
Specific safety notes for power supply, voltage protection, and configuration.
Overview of the DALI Multi-Master module's function and integration.
Details the 24-byte process image usage and advantages of Full Mode.
Explains Easy Mode for lighting control using binary signals without PLC programming.
Maps output and input process image bytes to DALI actuator functions.
Instructions on how to safely insert and remove I/O modules.
Step-by-step guide for inserting an I/O module into the assembly.
Step-by-step guide for removing an I/O module from the assembly.
Details hardware setup, power supply options, and PC connection for commissioning.
Step-by-step guide for configuring DALI devices, groups, scenes, and diagnostics.
Specific conditions for safe operation in hazardous environments under ATEX/IEC Ex.
Detailed conditions for safe use under ATEX Certificate TÜV 07 ATEX 554086 X.
Detailed conditions for safe use under IEC-Ex Certificate TUN 09.0001 X.
Specific requirements and warnings for use according to ANSI/ISA 12.12.01.
