Need help?Do you have a question about the WAGO 750-333/040-000 and is the answer not in the manual?
Provides essential safety warnings and precautions for installation and operation of the devices.
Details power supply, overcurrent protection, isolation, and grounding requirements.
Outlines commissioning steps including planning, GSD files, identifier bytes, and PI configuration.
Details responses to errors, device diagnostics, and troubleshooting steps for various issues.
Provides installation regulations, special notes on explosion protection, and warnings for hazardous environments.
General| Conformity marking | CE |
|---|---|
| Number of I/O modules | Up to 64 |
| Input current (system supply) | 100 mA |
| Current consumption at 5 V | 100 mA |
| Field supply voltage | 24 V DC |
| System supply voltage | 24 V DC |
| Operating temperature | -25 °C to +60 °C |
| Storage temperature | -40 °C to +85 °C |
| Relative humidity | 95 % (non-condensing) |
| Pollution degree | 2 |
| Protection type | IP20 |
| Power Supply | 24 V DC |
| Product Type | Fieldbus Coupler |
| Approvals | CE, UL |
| Bus segment length | Up to 1000 m |
| Fieldbus type | CANopen |
| Transmission speed | 9.6 kbps to 12 Mbps |
| Color | Gray |
| Mounting | DIN rail |
| Bus System | CANopen |
| Data Transfer Rate | 9.6 kbps to 12 Mbps |
| Fire load | 500 kJ |
To Next Page
