Need help?Do you have a question about the wallas Spartan and is the answer not in the manual?
Various exhaust lead-throughs for coaxial and duplex hull systems.
Ducts, dividers, and ventilation grills for warm air distribution.
Tank fittings, magnetic valves, and feed-throughs for the fuel system.
Advanced control panel and Bluetooth temperature beacon.
General guidelines for installing the heater unit.
Criteria for choosing a suitable and safe location for the heater.
Proper routing and protection for pipes, hoses, and electrical cables.
Advice on ensuring adequate space for installation and airflow.
Instructions for securely mounting the heater to a wall.
Important considerations and safety instructions for electrical connections.
Guidance on selecting appropriate cable cross-sectional area based on length.
Details on connecting the device to the power system, including fuses.
How to connect the device to a 24 VDC power system.
Procedures and checks for verifying electrical connections.
Planning routes and locations for heater ducting.
Details on distributing heated air and supplying makeup air.
Use of silencers to reduce noise from air hoses.
Recommended lead-throughs for coaxial exhaust systems.
Guidelines for location and installation of exhaust connections.
Steps and tips for installing exhaust gas lead-throughs.
Diagram showing installed side lead-through and cut-out dimensions.
List of items included in the 2467 side lead-through package.
Importance and function of the insulation kit for lead-throughs.
How to connect fuel hoses to the heater unit.
Guidelines on fuel hose material and filters based on country regulations.
Checks and adjustments for fuel feed, especially after component replacement.
Requirements for connecting the fuel supply from a fixed tank.
How to connect the fuel supply from a separate tank.
Step-by-step guide for installing the 30011 tank connection.
Instructions for installing a tank connection for a separate fuel tank.
Recommendations for solenoid valve placement based on fuel level scenarios.
Installation details for fuel filter 30015.
Information on using fuel filter 30016 for metallic fuel transfer systems.
Description of the automatic start-up process and initial start-up procedures.
Methods for adjusting heat via thermostat, manual mode, and pause mode.
Features for increasing air volume and fresh air ventilation.
Procedures for shutting down the heater and controlling it remotely.
Overview of control panel models and their operation.
How to view modes, select functions, and navigate menus.
Explanation of information displayed on the control panel screen.
Explanation of manual control, thermo control, ventilation modes, and starting example.
Accessing settings like Temp Sensor, Device Info, Device Stats, and Temp Unit.
Options for setting temperature units and managing Bluetooth connections.
Safety lock, error handling, and altitude optimization.
Prerequisites and checks before performing a software update.
Steps and considerations for updating the device software.
Connecting the control panel to the mobile application locally.
Operating the heater remotely via the internet using the Remote Link feature.
Steps for pairing the mobile app and control panel, including PIN code.
Connecting the control panel to the internet via Wi-Fi for remote operation.
Key points to check before performing a test run of the installation.
Guidelines for installing the fuel tank, filter, and hoses.
Specifications and safety measures for electrical connections.
Considerations for exhaust fumes and warm air outlet installation.
Steps for the first start-up, priming, and troubleshooting.
Recommended maintenance tasks and their intervals.
Advice on occasional use, fuel type, and winter storage.
Information on where to find spare parts.
Procedure for reporting and handling defects under warranty.
Cases where the warranty is not valid or applicable.
Information needed for warranty claims and general terms.
To Next Page
General
