To Next PageTo Next Page
Need help?Do you have a question about the wallas 40 Dt and is the answer not in the manual?
Lists the main unit and its essential parts.
Lists control panel and fuel filter package contents.
Guidelines for choosing a suitable installation spot.
Steps for fixing the mounting plate securely.
How to attach the heater to the plate using bolts.
Importance and recommendation for a main switch.
Explains the solenoid valve's role in preventing fuel emptying.
Air ventilation, exhaust outlet, switch placement.
Notes on fuel source, filter, hose connections.
Voltage, current source, and fuse placement.
Outlet location, goose-neck, and hull insulation.
Steps for starting the device for the first time.
Details the start-up and heating indicator lights.
Explains the function of various controls and indicators.
Addresses potential problems during the first start-up.
How to adjust heat via thermostat or manual control.
How to properly shut down the heater.
Key for understanding indicator light colours and functions.
Describes fault signals and how the device locks.
Step-by-step guide to unlock the device.
Describes fault signals and how the device locks.
Step-by-step guide to unlock the device.
Diagnosing and fixing fuel line or pump problems.
Identifying and resolving low voltage problems.
Diagnosing and fixing flameout issues.
Diagnosing and fixing overheat issues.
Manufacturer liability, duration, and registration.
Cases where warranty is not valid and limitations.
General
