EasyManua.ls Logo

wallas 1800 t User Manual

wallas 1800 t
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
10L
5L
2413
2411
2410
2412
2467
2448
2460
28/45mm
MAX 2m
1800,
MAX 5m
6m
6,2
kg
60
1,55m
7
kg
1800
2400
3415
12V
2400,
MAX 8m
2069
- 67 -
1800 t / 2400 t
1
2
3
4
5
7
8
9
10
12
6
11
13
en
Technical information
Mounting bolt M8 x 120 mm DIN 931 / ISO 4014
Corrugated base plate M8 DIN 137 A
Hose binder 32 - 50 mm
Fuse box
2 pcs
2 pcs
1 pcs
1 pcs
Heater (fuel hose and control panel cable installed)
Accessory bag 17662B
Mounting plate
1 pcs
1 pcs
1 pcs
1 pcs
2 pcs Push on contact 6.3 x 0.8 (yellow)
Fuse 15 A (blue)
Fastening screw 4,8 x 16 mm DIN 7981 / ISO 70496 pcs
Installation, operation and maintenance instructions1 pcs
Control panel
Control panel fastening screws 3,5 x 20 mm (black) TX10
Control panel package 3610661 pcs
1 pcs
4 pcs
Hose binder 50 - 70 mm2 pcs
Extension collar1 pcs
Control panel fastening screws 3,5 x 40 mm (black) TX104 pcs
Package contents
1800 t / 2400 t
490535
en
Question and Answer IconNeed help?

Do you have a question about the wallas 1800 t and is the answer not in the manual?

wallas 1800 t Specifications

General IconGeneral
Brandwallas
Model1800 t
CategoryHeater
LanguageEnglish

Summary

Technical Specifications

Heater Installation Guide

Installation location selection

Advice on choosing a suitable, protected, and accessible location for the heater installation.

Pipe and cable installation best practices

Notes on protecting cables and hoses from damage and ensuring proper routing for optimal performance.

Control Panel Installation

Electrical Connections Overview

Power cable cross-section sizing

Guidance on selecting the correct power cable cross-sectional area based on cord length to prevent voltage loss.

Electrical System Integration

12V DC system connection details

Instructions for connecting to a 12V battery, including fuse placement and wire connections.

Voltage check during startup

How to verify adequate voltage at the quick coupling during the initial startup phase.

Fuel System Connections

Fuel Lines and Tank Plumbing

Exhaust Gas Lead-Throughs

Specific Lead-Through Instructions

Closable Lead-Through 2460

Warm Air Distribution

Installation and Initial Start-up

Pre-installation checks

Key considerations before starting installation, covering air intake, ventilation, exhaust placement, and switch location.

Initial start-up procedure and checks

Steps for the first start-up, including filling fuel lines, checking for leaks, and initial burn-off.

Unit Operation - Ignition

Heater ignition sequence

How to initiate heating by pressing the switch and the function of the heating and combustion indicator lights.

Heat Adjustment Modes

Thermostat mode usage

Details on setting the desired cabin temperature and how the thermostat and sun-switch functions operate.

Manual power adjustment

Instructions for manually controlling the heater's power output, including avoiding rapid adjustments.

Advanced Operation Modes

Maintenance Recommendations

Scheduled basic maintenance

Details on essential maintenance tasks and the recommended 5-year service interval by authorized personnel.

Product Warranty Terms

Related product manuals