What to do if the LED halo is red on my Wallbox Automobile Accessories?
If the LED halo on your Wallbox Automobile Accessories is red, indicating an error, it signifies a safety issue with either your electrical connection or vehicle. To resolve this, unplug the EV connector from your vehicle. Then, perform a power cycle by switching off the circuit at the circuit breaker, waiting a few seconds, and switching it back on.
General| Housing color | Black |
|---|---|
| Mounting type | Wall |
| LED indicators | Yes |
| Built-in display | No |
| Housing material | - |
| Sockets quantity | 1 |
| Power source type | AC |
| Quantity per pack | 1 pc(s) |
| IEC protection class | III |
| Vehicle connection plug | Type 1 |
| Cross-section connection | 5 x 10 mm² |
| Mechanical impact protection code | IK08 |
| International Protection (IP) code | IP54 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -25 - 40 °C |
| Number of phases | 3 |
| Nominal frequency | 60 Hz |
| Voltage tolerance | 10 % |
| Three-phase output voltage supported | 400 V |
| Maximum operating power (three-phase) | 7.4 kW |
| Single-phase output voltage supported | 220, 240 V |
| Maximum operating current (three-phase) | 32 A |
| Sustainability certificates | CE |
Weight and Dimensions| Depth | 82 mm |
|---|---|
| Width | 163 mm |
| Height | 166 mm |
| Weight | 1000 g |
| Charging cable length | 5 m |
To Next Page
