information and assistance with data logging, contact the Wallgate sales office.
5.6.8. Auto-Run
The Auto-Run function allows any output to automatically open at a set time every
day. There are 48 off half hourly time activation settings available for each output.
Refer to section 7 to view the available time settings. When an output operates at
the set time, it is ON for the preset cycle run time as set in “Cell Water Settings” of
the WDC100 menu.
5.7. Technical Specifications
Table 3.Technical specifications
115-230V AC (Fuse 2Amp), 50Hz Single phase, (UK, Europe,
Australasia)
Maximum Rating 60 Watts.
(Refer to model WDCA100 for North America)
To Next Page
Loading...
