EasyManua.ls Logo

Wallgate WDC100 - 6.2. Maintenance

Wallgate WDC100
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Revision 15
22
feature is factory set to Disabled. Refer to Table 5 on page 23 for more
information on the Lockout function.
You can adjust the period of operation for each function such as the basin/bath,
shower and WC. The electronic control unit cannot control the water temperature
for example on a basin/bath or shower.
6.2. Maintenance
Wallgate offers a comprehensive service package, details of which can be
obtained from our customer service department.
A spare parts service is also available.
The electronic control unit does not have any user serviceable parts. In the event
of a fault, switch off the electrical supply and contact an authorised electrician to
replace the unit.
Any service or repair work must be carried out by a qualified engineer. During the
warranty period, the service or repair must only be done by a Wallgate engineer
or appointed service agent. Refer to the Wallgate Limited’s terms and conditions
for warranty information.

Related product manuals