Owner’s manual 5
SURFOX Stainless steel passivation tester
1. Tool overview
SURFOX PASSIVATION TESTER is an electrochemical testing device that pro-
vides a numeric value of the quality of the protective chromium passive layer on
stainless steel. The device provides within seconds a stable and precise value
related to the state of the passivation process.
2. Tool features
2.1 Components (Fig. 1, page 4)
2.2 Technical data
2.3 Included in the kit
1. EXTERNAL UNIT
2. TEST PROBE
3. Battery box (Rear side)
4. 4 pin connector on external unit
5. 4 pin connector on test probe
6. 4 pin cable
7. Refilling cartridge cap/ Cap
placement
8. Testing tip
9. Cap
10. Ground tip
11. USB cable
12. USB port
13. Calibration plate
u 4 PIN connection cable
u USB Cable
u Calibration control plate
u Software CD
u Owner’s manual
u Carrying case
SURFOX PASSIVATION TESTER is built in compliance with
established EU safety standards and bears the CE mark.
MODEL SURFOX PASSIVATION TESTER
Supply voltage 6 V
Tool weight 230 g
Tool dimension (mm) 156 x 40 x 20
To Next Page
Loading...
