PGT
®
120.COM Art.Nr. 7100.PGT120.COM
5 / 17 2016-09-07
3 Installation
The Unit is for desktop or wall mounting. The optionally available wall mounting
frame (Part No. 7100.PGT120.WK) can be used to fix the unit to a wall.
The power is supplied by a power supply.
Use only an original power supply connected to the "AC12V" socket on the rear..
Do not connect any conducting articles with PGT
®
120.COM exept original
accessories (power supply, foot wear electrode and cabel for serial port) and the
door opener.
Connect the foot electrode with the coloured marked plugs to the back of the unit for
footwear test.
To Next Page
Loading...
