Warn 81910 - Moving Parts Entanglement Hazard; Equipment Damage Warnings

WARN INDUSTRIES PAGE 2 81948A2
©2011 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Notice
Equipment Damage
  Always refer to the Installation and Specication Guide, supplied in the winch kit, for all wiring schematics and specic details
on how to wire this WARN product to your vehicle.
Read installation and operating instructions thoroughly.
I. TABLE OF CONTENTS
Tools Required page 2
Fastener Torque Specications page 2
Parts List page 3
Installation page 4
Maintenance/Care page 5
Caution
Moving Parts Entanglement Hazard
Failure to observe these instructions could lead to minor or moderate injury.
 Always take time to fully read and understand the installation and Operations Guide included with this product.
Never operate this product if you are under 16 years of age.
Never operate this product when under the inuence of drugs, alcohol or medications.
Read installation and operating instructions thoroughly.
II. TOOLS REQUIRED
- Rachet
- Sockets 7/16 and 1/2
III. FASTENER TORQUE SPECIFICATIONS
1/4 & M6 8 lb. ft. (10.8 N-m)
5/16 & M8 17 lb. ft. (12.5 N-m)
3/8 & M10 30 lb. ft. (40.7 N-m)
7/16 50 lb. ft. (67.8 N-m)
1/2 75 lb. ft. (101.7 N-m)
NOTE: This bumper includes mounting holes for WARN winch and trail lights, which are
sold separately.