Warn 70770 - User Manual

PAGE 1 85553 Rev. A0
INSTALLATION INSTRUCTIONS
WARN Portable Anchor Plate
Part Number: 70770
Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided
installation and operating instructions and other information on labels and in this guide. This information alerts you to potential hazards
that could hurt you or others. It is not possible to warn you about all potential hazards associated with this product; you must use your
own good judgment.
CARELESS WINCH & ACCESSORY INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY OR
EQUIPMENT DAMAGE. READ AND UNDERSTAND ALL SAFETY PRECAUTIONS AND OPERATING
INSTRUCTIONS BEFORE INSTALLING AND OPERATING THIS PRODUCT.
This guide identifies potential hazards and has important safety messages that help you and others avoid personal injury
or death. WARNING and CAUTION are signal words that identify the level of hazard. These signal words mean:
WARNING signals a hazard that could cause serious injury or death, if you do not follow
recommendations.
CAUTION signals a hazard that may cause minor to moderate injury, if you do not follow
recommendations.
This guide uses NOTICE to call attention to important mechanical information, and Note: to emphasize general information worthy of
special attention

Summary

WARN Portable Anchor Plate Product Details

Introduction and Purchase Information

Welcome to the WARN Portable Anchor Plate. Record purchase details for future reference.

Winch Installation Guide

Mounting the Winch to the Plate

Instructions for attaching the winch to the portable anchor plate using specified hardware.

Anchor Chain Attachment

Securing Chains to the Anchor Plate

Detailed procedure for attaching the anchor chains to the mounting plate via holes and key slots.

Safe Rigging Practices

Moving Parts Entanglement Hazard Warning

Critical safety notice advising users to keep hands clear of moving winch components during operation.

Warranty and Contact Information

Customer Support Details

Contact information for warranty claims and technical support in the US and internationally.

Warn 70770 Specifications

General

Product Type	Winch
Motor	Series Wound
Gear Ratio	216:1
Line Length	80 ft
Line Diameter	5/16 in
UPC	012748707700
Model	70770
Category	Automobile Accessories
Motor Type	Electric
Gear Type	3-Stage Planetary
Control Type	Remote