Warn PullzAll - Pullzall Specifications; Corded 120 VAC Pullzall Specifications; Cordless 24 V DC PullzAll Specifications

WARN INDUSTRIES * THE BASIC GUIDE TO UTILITY PULLING
7
PULLZALL SPECIFICATIONS
The Corded WARN® PullzAll consists of the following features:
1. Variable Speed Trigger 6. Power Cord
2. Directional Switch 7. Swiveling Anchor Hook
3. Fairlead 8. On/Off Power Switch
4. Hook with Latch and Hook Strap 9. Wire Rope
5. Ready/Overload Indicator
Specifi cation Data for the Corded WARN PullzAll
Max Pulling Capacity 1000 lbs. (454 kg)
Wire Rope Diameter 7/32 in (0.56 cm)
Power Source 120 VAC
Power Input 1200 W (10A)
The Corded WARN PullzAll is a powerful pulling tool. Powered by a 120 volt AC power
source this compact tool has a pulling capacity of 1000 pounds (454 kilos).
The unit has a variable speed trigger for power-in and power-out operation, 15 ft (4.6 m) of
7/32 inch (0.56 cm) wire rope and two clasp hooks.
1.
3.
2.
2
3
4.
9.
6.
5.
8.
7.
5
WARN INDUSTRIES * THE BASIC GUIDE TO UTILITY PULLING
8
PULLZALL SPECIFICATIONS
The CordlessWARN® PullzAll consists of the following features:
1. Variable Speed Trigger 6. Rechargeable Battery
2. Directional Switch 7. Swiveling Anchor Hook
3. Fairlead 8. On/Off Power Switch
4. Hook with Latch and Hook Strap 9. Wire Rope
5. Ready/Overload Indicator 10. Battery Release Button
Specifi cation Data for the Cordless WARN PullzAll
Max Pulling Capacity 1000 lbs. (454 kg)
Wire Rope Diameter 7/32 in (0.56 cm)
Power Source 24V DC Battery (NiMH)
Power Input 720 W (30 A)
The Cordless WARN PullzAll is a powerful pulling tool. Powered by a 24 volt rechargeable
battery this compact tool has a pulling capacity of 1000 pounds (454 kilos).
The unit has a variable speed trigger for power-in and power-out operation, 15 ft (4.6 m) of
7/32 inch (0.56 cm) wire rope and two clasp hooks.
1.
3.
2.
4.
9.
10.
6.
5.
8.
7.
WM-PullzAll Wench
Rev.0
WM-PullzAll Wench
Printed on 9/20/13
Page 4 of 32