To Next PageTo Next Page
Need help?Do you have a question about the Warn 3000ACI and is the answer not in the manual?
Welcome, record winch details, and review pre-installation steps before beginning operation.
Warning about entanglement hazards with moving parts, instructing to avoid injury to hands or fingers.
Warning about falling/crushing hazards, stating not to use as hoist or to lift persons.
Lists and illustrates the main components of the WARN® 3000ACI Utility Winch.
Provides technical drawings and dimensions for the WARN® 3000ACI Utility Winch.
Details specifications like pulling capacity, motor, rope, weight, and electrical requirements.
Presents performance data for both 115V and 230V operation, including load, speed, and pulling power.
Instructions for mounting the winch to a fixed location, including hole pattern specifications.
Caution regarding winch failure if mounting location is not strong enough for intended loads.
Warning about shock hazard during wiring, requiring qualified electricians and proper grounding.
Instructions for wiring the winch motor, referencing diagrams for 115V/230V AC power source connection.
Instructions on clutch operation, warning against engaging/disengaging under load, and proper lever use.
No lubrication required. Inspect wire rope before and after each winching operation.
Details on warranty coverage and contact information for Warn Industries Customer Service.
Welcome, record winch details, and review pre-installation steps before beginning operation.
Warning about entanglement hazards with moving parts, instructing to avoid injury to hands or fingers.
Warning about falling/crushing hazards, stating not to use as hoist or to lift persons.
Lists and illustrates the main components of the WARN® 3000ACI Utility Winch.
Provides technical drawings and dimensions for the WARN® 3000ACI Utility Winch.
Details specifications like pulling capacity, motor, rope, weight, and electrical requirements.
Presents performance data for both 115V and 230V operation, including load, speed, and pulling power.
Instructions for mounting the winch to a fixed location, including hole pattern specifications.
Caution regarding winch failure if mounting location is not strong enough for intended loads.
Warning about shock hazard during wiring, requiring qualified electricians and proper grounding.
Instructions for wiring the winch motor, referencing diagrams for 115V/230V AC power source connection.
Instructions on clutch operation, warning against engaging/disengaging under load, and proper lever use.
No lubrication required. Inspect wire rope before and after each winching operation.
Details on warranty coverage and contact information for Warn Industries Customer Service.
General| Pulling Capacity | 3000 lbs |
|---|---|
| Gear Ratio | 153:1 |
| Cable Type | Steel |
| Cable Length | 50 ft |
| Motor Type | Permanent Magnet |
| Motor | 12V DC |
| Gear Train | Planetary |
| Cable Diameter | 3/16 inch |
| Remote Control | Hand-held remote |
| Brake | Automatic |
