EasyManua.ls Logo

WARRIOR WEP8011 - Battery Charger; Specifications

WARRIOR WEP8011
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BATTERy CHARGER
12
REPLACE TRIMMER LINE
1. Firmly press in the tabs on each side of the spool
cover.
2. Remove the spool cover from the spool housing.
3. Remove any excess trimmer line or obstructions
from the spool.
4. Use a clean cloth to wipe away any debris from the
spool, spool cover, or spool housing.
5. Replace new trimmer line onto the spool housing.
6. Align the tabs of the spool cover with the posts on
the spool housing. Push the spool cover until the
tabs securely snap into the posts.
Note: If you put a different model string head on this unit
please follow the manufacturer’s instructions to install
that head.
CUTTING TIPS
Keep the trimmer tilted toward the area being cut;
this is the best cutting practice.
The trimmer cuts when passing the unit from
right to left. This will avoid throwing debris at the
operator. Avoid cutting in the dangerous areas.
Use the tip of string to do the cutting; do not force
string head into uncut grass.
Wire and picket fences cause extra string wear and
breakage. Stone and brick walls, curbs, and wood
may wear string rapidly.
Avoid trees and shrubs. Tree bark, wood moldings,
siding, and fence posts can easily be damaged by
the string. (If long grass or brush needs to be cut
change blade to metal).
Under the function of cutting shrubs, if the cutting
shrubs are too thick to cause the machine to stop,
please clean the branches and leaves between the
knife plate and the guard, and wait for the machine
speed to reach the highest before cutting.
BATTERY CHARGER
SPECIFICATIONS
Charger: WEP8370BC
Input: 120-240VAC, 50/60Hz
Output: 42VDC. Max.2.2A
Weight: 1.2 lbs (0.55kg)
WARNING
The battery is not shipped/transported fully
charged. Fully charge the battery before first use
to ensure that maximum run time can be achieved.
This lithium-ion battery will not develop a memory
and may be charged at any time.
CHARGING PROCEDURE
LED STATUS DESCRIPTION
Blinking Green Charging
Solid Green Fully charged
Solid Red Stand by
Blinking Red (fast) Battery too hot
Blinking Red (slow) Charging fault
Spool Cover
Spool
Trimmer Line
Cutting Area
Spool Housing

Related product manuals