Need help?Do you have a question about the Wartsila 12V46F and is the answer not in the manual?
General| Cylinder Arrangement | V-type |
|---|---|
| Number of Cylinders | 12 |
| Bore | 460 mm |
| Stroke | 580 mm |
| Engine Type | 4-stroke |
| Power Output | 13800 kW |
| Power output per cylinder | 1150 kW |
| Specific fuel consumption | 175 g/kWh |
| Fuel Type | Marine diesel |
| Cooling System | Water-cooled |
Details maximum continuous output for different engine configurations.
Provides physical dimensions and dry weights for various engine variants.
Defines operational limits, including speed and load areas, for engine performance.
Discusses controlled load increase rates and capacity for propulsion types.
Presents detailed technical specifications for the Wärtsilä 6L46F engine.
Presents detailed technical data for the Wärtsilä 7L46F engine.
Presents detailed technical data for the Wärtsilä 8L46F engine.
Presents detailed technical data for the Wärtsilä 9L46F engine.
Presents detailed technical data for the Wärtsilä 12V46F engine.
Presents detailed technical data for the Wärtsilä 14V46F engine.
Presents detailed technical data for the Wärtsilä 16V46F engine.
Explains the primary components and functional systems of the engine, such as block, crankshaft, etc.
Describes the low-pressure fuel lines, injection pumps, and nozzles.
Explains the division into high and low temperature cooling circuits.
Details specifications for acceptable fuel types, including MDF and HFO grades.
Specifies requirements for engine lubricating oil, including viscosity and Base Number (BN).
Covers marine exhaust emission regulations, focusing on IMO Tier standards for NOx.
Introduces the UNIC C2 engine management system, its architecture, and modules.
Explains engine functions like starting, stopping, speed control, and startblockings.
To Next Page