Need help?Do you have a question about the Wartsila 16V46F and is the answer not in the manual?
Specifies the maximum continuous power output for various Wärtsilä 46F engine configurations in kW and bhp.
Provides detailed dimensions and dry weights for in-line and V-engines, including additional weights.
Describes the acceptable operating limits and speed range for the engine, including CP propeller considerations.
Explains controlled load increase for supercharged engines and load acceptance for different propulsion types.
Presents detailed technical specifications for the Wärtsilä 6L46F engine, covering various systems and parameters.
Provides detailed technical specifications for the Wärtsilä 7L46F engine, covering various systems and parameters.
Details technical specifications for the Wärtsilä 8L46F engine, including combustion air, exhaust gas, and fuel systems.
Presents technical data for the Wärtsilä 9L46F engine, covering system parameters and performance details.
Contains technical specifications for the Wärtsilä 12V46F engine, including system data and performance metrics.
Provides technical data for the Wärtsilä 14V46F engine, detailing its various system specifications and performance.
Details technical specifications for the Wärtsilä 16V46F engine, covering system parameters and performance metrics.
Describes the engine block, crankshaft, connecting rod, bearings, cylinder liner, piston, rings, and cylinder head.
Lists recommended maintenance intervals and expected lifetimes for various engine components.
Defines acceptable fuel specifications based on ISO 8217, including MDF and heavy fuel oil properties.
Describes the design considerations for external fuel oil systems, including treatment and heating requirements.
Specifies requirements for engine lubricating oil, including viscosity class, VI, and Base Number (BN).
Illustrates external lubricating oil systems with engine-driven and electric-driven pumps, detailing components.
Describes the engine starting system using compressed air and its use for control functions.
Guidelines for engine room ventilation to maintain acceptable operating conditions and supply combustion air.
Details external exhaust gas system design factors, including piping, supporting, back pressure, and silencer systems.
Describes the UNIC C2 automation system, its architecture, modules, and interfaces for engine control.
Details engine functions like start, stop, startblockings, and speed control for main engines and generating sets.
Describes engine mounting arrangements, including rigid mounting with steel or resin chocks.
Details working space, engine room height, lifting equipment, and maintenance platform requirements.
To Next Page
General