Need help?Do you have a question about the Wartsila 6L34DF and is the answer not in the manual?
Engine specifications including bore, stroke, displacement, number of valves, configuration, etc.
Rating table for main engines and generating sets based on cylinder configuration and speed.
Factors affecting engine output in gas mode, including methane number and charge air temperature.
Dimensional drawings and weight data for in-line and V-engines and generating sets.
Guidelines for maintaining engine parameters within acceptable limits during operation.
Essential considerations for controlled load increase and maximum load acceptance.
Detailed technical specifications for the Wärtsilä 6L34DF engine, including performance and system data.
Detailed technical specifications for the Wärtsilä 9L34DF engine, including performance and system data.
Detailed technical specifications for the Wärtsilä 12V34DF engine, including performance and system data.
Detailed technical specifications for the Wärtsilä 16V34DF engine, including performance and system data.
Specifications for gas and liquid fuels, including quality requirements and properties.
Explains dual fuel operation modes: gas, diesel, and backup modes, including mode transfer.
Details of the internal and external fuel gas systems, including components and safety aspects.
Description of internal and external fuel oil systems for MDF and HFO, including components and their functions.
Specifications for lubricating oil, including viscosity class, Base Number (BN), and fuel compatibility.
Overview of the internal lubricating oil system components and their functions for in-line and V-engines.
Description of external lubricating oil systems for wet and dry sump configurations, including separation units.
Details of the engine starting system using compressed air, including slow turning and safety features.
Requirements for fresh water quality in the cooling system, including pH, hardness, and inhibitors.
Description of the internal HT and LT cooling water circuits, including pumps and coolers.
Overview of exhaust emissions from dual fuel engines, including typical levels in gas and diesel modes.
International regulations (IMO) concerning marine exhaust emissions, including NOx and SOx limits.
Description of the Wärtsilä Unified Controls (UNIC) C3 automation system architecture and modules.
Engine operating modes (gas, diesel, backup) and transfer control procedures.
To Next Page
General