41
Trouble shooting
The purpose of the trouble-shooting guide is to facilitate the location and
correction of the most common machine problems.
Before the top panel is removed, power to the machine must be switched
off at the main source or at the separete circuit breaker.
At each trouble-shooting attempt, the plug in connectors on the control
panel should be moved in and out in order to eliminate improper contact
due to faulty connection.
Please note that this guide does not include all possibilities, but only those
most likely to cause the symtoms listed.
In trouble-shooting electrical problems, always make certain to have the
proper electrical schematic or wiring diagram at hand. Test for power using
a V-O-M or similiar meter on the AC voltage scale. Test for continuity with
all electrical power off.
To Next Page
Loading...
