EasyManuals Logo

Watchguard Firebox T15 Hardware Guide

Watchguard Firebox T15
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
4 WatchGuard Firebox T15
Hardware Specifications
Attn
The Attn indicator is lit when you start the device with the Reset button pressed. For more
information, see “Restore Factory Default Settings” on page 6
Power ( )
The power indicator is lit when the device is on.
Rear View
The rear panel of the Firebox T15:
Network interfaces
The Ethernet interfaces have standard RJ45 connectors and support link speeds of 1, 100, or 1000
Mbps. The Firebox T15 has three network interfaces. They are labeled 0/WAN, 1/LAN, and 2.
USB interfaces
The Firebox T15 has one USB interface. Connect a USB storage device to use for USB backup and
restore, or to store a support snapshot. For more information, see the current Fireware Help.
Serial port (Console)
An RJ45 connector for the serial interface. An RJ45 serial cable is not included with the device.
Power input
A 12V/1.25A power supply is included with your device. Connect the AC adapter to the device and to
a power source. The power supply tip is plus (+) polarity. Use only the supplied AC power adapter.
Power switch
Controls the power supplied to the device.
Reset button
To reset the device, use the procedure in “Restore Factory Default Settings” on page 6.
AC Power Adapter
The AC power adapter supplies power for the Firebox. A Firebox shipped outside the U.S. includes four power
cables to connect to the AC power adapter. Use the correct power cable for the power source used in your
country.
Do not connect this power adapter to any other WatchGuard product.

Other manuals for Watchguard Firebox T15

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Watchguard Firebox T15 and is the answer not in the manual?

Watchguard Firebox T15 Specifications

General IconGeneral
Firewall throughput400 Mbit/s
Branch Office VPN5
IPS/IDS throughput160 Mbit/s
Maximum firewall connections100000
Maximum firewall connections per second2400
DHCP clientYes
Number of VLANs10
Number of users200 user(s)
WAN connectionEthernet (RJ-45)
USB 2.0 ports quantity1
Connectivity technologyWired
Ethernet LAN (RJ-45) ports3
Gigabit Ethernet (copper) ports quantity4
Supported network protocolsIPv6
VPN supportIPSec, SSL, L2TP
Firewall securityDoS, HTTP, HTTPS, SMTP, FTP, DNS, TCP, POP3, SIP, H.323
Security algorithms3DES, 128-bit AES, 192-bit AES, 256-bit AES, 802.1x RADIUS, DES, MD5, SHA-1, SSL/TLS
Power supply15 W
Input current1.25 A
AC input voltage100-240 V
AC input frequency50 - 60 Hz
CertificationWEEE, RoHS, ICSA, NRTL/C, CB
Heat dissipation51 BTU/h
Mean time between failures (MTBF)129955 h
Operating altitude0 - 3000 m
Non-operating altitude0 - 4570 m
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)190 x 152 x 32 mm

Related product manuals