3
Warranty
WHAT IS COVERED
Thi s pump i s guar anteed for 90 days from d ate of purchase. It will pump clean water and motor oil.
WHAT IS
NOT COVERED
Pumping anything other than clean water and motor oil, and if damaged due to misuse from primarily being run without water or oil in the
pump (running the pump dry).
Contact the Cu stomer Service Team at 1-844-883-1872 or visit www.HomeDepot.com.
Pre-Assembly
PRODUCT SPECIFICATIONS
Maxi
m
um Head at 1,200 RPM 45 ft.
Ma
ximum
Head at 800 RPM 32 ft.
R
ate of Flow a
t 1,200 RPM 90 GPH
R
ate of Flow a
t 800 RPM 60 GPH
P
riming Self-priming up to 8 ft. vertical ly
Lu
br
ication Pressure-lubricated bearings, shaft, and seal
PLANNING OPERATIO
N
Carefully unpack and inspect each part. Compare parts with the Package Contents list. If any part appears missing or damaged, do not
operate this product. Contact the Customer Service Team.
TOOLS REQUIRED
Drill Garden h ose
Warranty
WHAT IS COVERED
Thi s pump i s guar anteed for 90 days from d ate of purchase. It will pump clean water and motor oil.
WHAT IS
NOT COVERED
Pumping anything other than clean water and motor oil, and if damaged due to misuse from primarily being run without water or oil in the
pump (running the pump dry).
Contact the Cu stomer Service Team at 1-844-883-1872 or visit www.HomeDepot.com.
Pre-Assembly
PRODUCT SPECIFICATIONS
Maxi
m
um Head at 1,200 RPM 45 ft.
Ma
ximum
Head at 800 RPM 32 ft.
R
ate of Flow a
t 1,200 RPM 90 GPH
R
ate of Flow a
t 800 RPM 60 GPH
P
riming Self-priming up to 8 ft. vertical ly
Lu
br
ication Pressure-lubricated bearings, shaft, and seal
PLANNING OPERATIO
N
Carefully unpack and inspect each part. Compare parts with the Package Contents list. If any part appears missing or damaged, do not
operate this product. Contact the Customer Service Team.
TOOLS REQUIRED
SPECIFICATIONS
Maximum Head at 1,200 RPM 45 ft.
Maximum Head at 800 RPM 32 ft.
Rate of Flow at 1,200 RPM 90 GPH
Rate of Flow at 800 RPM 60 GPH
Priming Self-priming up to 8 ft. vertically
Lubrication Pressure-lubricated bearings, shaft and seal
PART DESCRIPTION REPLACEMENT PART NO. QUANTITY
A Oil tube, 30 “ x 1/4” O.D. EF60DRILL003 1
B 3” Adapter tube (3/8” O.D. & 1/4” I.D.) EF60DRILL005 1
C Pump EF60DRILL001 1
D 3’ x 1/2” Garden hose with brass female tting EF60DRILL006 1
TOOLS REQUIRED
Drill Garden Hose
TOOLS REQUIRED
Carefully unpack and inspect each part. Pull oil tube completely out of garden hose. Compare parts with the
Package Contents list. If any part appears missing or damaged, do not operate this product. Contact the
Customer Service Team.
CONTENTS
A
B
C
D
A
B
C
IN
OUT
D
NOTE: If using a garden hose on the suc-
tion side of pump, then the hose must be
sti walled and be kept as short as pos-
sible. If not, then there is a risk of the hose
collapsing and blocking suction. There
can be no leaks in the suction line or the
pump will not prime.
To Next Page
Loading...
